If a transmission fails
3
3-18 bizhub 226
3.6
3.6 If a transmission fails
If a fax transmission ends abnormally because a destination fax machine returns no response in the busy
state or a communication error occurs during fax transmission, this machine automatically redials the target
destination. In this case, a document to be sent is handled as a reserved document that is queued for redi-
aling.
As a result of redialing, if a fax transmission fails again, a transmission result report is printed out.
Tips
- The default redialing count is 10 times, and the default redialling interval is 3 min. - 3 min. - 15 min. - 3
min. - 3 min., which is repeated twice. When necessary, these defaults can be changed. For details,
contact your service representative.
d Reference
For the transmission result report, refer to page 3-22.
To Next Page
Loading...
