bizhub 226 3-25
3.12 Specifying the transmission time (Specified-time transmission)
3
3.12 Specifying the transmission time (Specified-time transmission)
The function that specifies a communication time is referred to as a specified-time transmission. Costs can
be cut by transmitting faxes in the late evening or early morning when discount telephone services are avail-
able.
Tips
- Enter the time using the 24-hour system.
- If the current time is not registered accurately, data cannot be sent at the specified time. For details on
how to specify the current time, refer to page 2-12.
- The specified-time transmission can be specified with the sequential broadcast transmission, confiden-
tial transmission, polling reception, and relay instruction transmission.
- The specified-time transmission cannot be used together with the immediate transmission.
1 Load the original.
2 When necessary, specify a desired option for [QUALITY].
3 Specify a destination.
% For details on how to specify a destination, refer to page 3-8.
4 Press ,.
The other setting screen appears.
5 Use +, to select [TIMER SETTING], and press the OK key.
6 Enter the transmission time using the Keypad, and press the OK key.
7 Use +, to select [RETURN], and press the OK key.
This returns to the transmission screen.
8 Press the Start key.
This starts scanning, and changes to the transmission standby state.
d Reference
A transmission reservation can be canceled. For details, refer to page 3-20.
To Next Page
Loading...
