Konica Minolta BIZHUB 226 - Specifying Header Printing

Adding functions
5
5-12 bizhub 226
5.4
5.4.3 Specifying header printing
1 Press the Utility key.
2 Use +, to select [ADMIN. MANAGEMENT], and press the OK key.
3 Enter the administrator number using the Keypad, and press the OK key.
% The factory default of the administrator number is "000000".
% To correct a numeric value, press the Clear/Stop key.
4 Use +, to select [E-MAIL SETTING 2], and press the OK key.
5 Use +, to select [HEADER PRINT], and press the OK key.
6 Use +, to select [OFF] or [ON], and press the OK key.
This returns to the E-mail Setting 2 screen.