bizhub 226 7-3
7.1 Utility settings
7
7 Utility and Fax Settings
7.1 Utility settings
The Utility screen provides five fax setting items.
Tips
- Some items cannot be configured depending on which optional device is installed on this machine. If
an item that cannot be configured is selected, an error message appears.
d Reference
The items above, excluding No.2, can also be configured using LSU (Local Setup Utility). For details, refer to
page 11-4.
d Reference
For details on the following settings, refer to [User's Guide Copy Operation].
[MACHINE SETTING]: Set up the operating environment of this machine.
[PAPER SOURCE SETUP]: Specify the size and type of paper loaded in Tray 1.
[CUSTOM SIZE MEMORY]: Register a custom size.
[DRUM DEHUMIDIFY]: Perform maintenance operations to prevent a function reduction.
[ADMIN. MANAGEMENT]: Configure management settings for each account track, or specify the sleep
mode.
[COPY SETTING 1/2]: Configure default settings of each copy function.
d Reference
For details on the following settings, refer to [User's Guide Scan].
SCAN SETTING: Configure scanner settings.
In addition to No.1 to No.5, the following items can be configured if FAX Kit FK-510 is installed on this ma-
chine. Press the Utility key, and configure the following settings as necessary.
No. Name Description Reference
page
1 [DIAL REGISTRATION] Register destinations in the one-touch dial, speed di-
al, and group dial.
p. 7-6
2 [FAX REGISTRATION] Configure the default settings for each fax function. p. 7-17
3 [FAX TX OPERATION] Configure the default settings for transmission opera-
tions.
p. 7-21
4 [FAX RX OPERATION] Configure the default settings for receiving opera-
tions.
p. 7-23
5 [REPORTING] Configure the default settings for each report func-
tion.
p. 7-28
To Next Page
Loading...
