Konica Minolta BIZHUB 226 - Specifying the Time to Switch to the Daylight-Saving Time

bizhub 226 2-13
2.3 First required registration and setting check
2
2.3.4 Specifying the time to switch to the daylight-saving time
1 Press the Utility key.
2 Use +, to select [ADMIN. MANAGEMENT], and press the OK key.
3 Enter the administrator number using the Keypad, and press the OK key.
% The factory default of the administrator number is [000000].
4 Use +, to select [USER SETTING], and press the OK key.
5 Use +, to select [DAYLIGHT SAVING], and press the OK key.
6 Use +, to select [OFF] or [ON], and press the OK key.
% If [ON] is selected, enter the time difference (1 to 150 min.) in the following screen, and press the
OK key.
This returns to the User Settings screen.
Tips
- Use this setting to manually configure the difference between winter time and summer time. The time
system does not automatically switch between winter time and summer time.
DAYLIGHT SAVING
OFF
ON
min)
min(