bizhub 226 4-11
4.5 Specify a relay distribution station for transmission (Relay Instruction transmission)
4
4.5 Specify a relay distribution station for transmission (Relay In-
struction transmission)
The relay instruction transmission is a function that sends an original to a relay distribution station once, and
broadcasts it from the relay distribution station to destinations. When there are multiple jobs to broadcast a
document to distant destinations, group relay distribution stations and relay distribution destinations for each
region, enabling a reduction of the entire communication charge
Tips
- The relay instruction transmission function supports F-code communication.
- For a relay distribution station, specify a model compatible with the relay broadcasting. This machine
can be specified as a relay distribution station.
- The relay instruction transmission cannot be used together with the confidential transmission.
- To specify the relay instruction transmission , you must register a Relay User Box ID in a relay distribu-
tion station in advance. For details, refer to page 7-19.
1 Load the original.
% For details on how to load the original, refer to page 3-5.
2 When necessary, specify a desired option for [QUALITY].
% For details on [QUALITY], refer to page 3-7.
3 Press the Function key.
4 Use +, to select [RELAY INITIATE], and press the OK key.
5 Specify a relay distribution station, and press the OK key.
% For details on how to specify a relay distribution station, refer to page 3-8.
6 Enter a Relay User Box ID using the Keypad, and press the OK key.
% Enter a Relay User Box ID registered in a relay distribution station with up to 20 digits.
% The characters available for a Relay User Box ID are only 0 to 9, *, and #.
% To correct a numeric value, press the Clear/Stop key.
To Next Page
Loading...
Need help?
General
