Konica Minolta BIZHUB 226 - Registering Destinations in the Program Dial

bizhub 226 7-13
7.2 Store Address
7
7.2.8 Registering destinations in the program dial
Register a destination number and transmission-receiving function in a One-Touch Dial Key; you can only
press the One-Touch Dial Key to execute the function.
<Transmission and receiving functions that can be registered>
- Sequential broadcast transmission
- Specified-time transmission
- Confidential TX
- Polling RX
- Relay instruction transmission
1 Press the Utility key.
2 Use +, to select [DIAL REGISTRATION], and press the OK key.
3 Use +, to select [PROGRAM DIAL], and press the OK key.
4 Press a target key among One-Touch Dial Key 29 to 32.
% One-touch dial keys 29 to 32 are available when the Switching Plate is opened upward.
5 Use +, to select a target function, and press the OK key.
6 Follow the setting procedure for each function.
% Sequential broadcast transmission (p. 3-15)
% Specified-time transmission (p. 3-25)
% Confidential transmission (p. 4-5)
% Relay instruction transmission (p. 4-11)
% Polling RX (p. 4-10)
Settings are registered.
7 Use +, to select [RETURN], and press the OK key.
This registers settings, and returns to the Store Address screen.