Konica Minolta BIZHUB 226 - Changing or Deleting the Relay Instruction Transmission Program

Store Address
7
7-16 bizhub 226
7.2
7.2.13 Changing or deleting the relay instruction transmission program
1 Press the Utility key.
2 Use +, to select [DIAL REGISTRATION], and press the OK key.
3 Use +, to select [PROGRAM DIAL], and press the OK key.
4 Press the One-Touch Dial Key that contains the relay instruction transmission program you want to
change or delete.
5 Use +, to select [EDIT] or [DELETE], and press the OK key.
% If [EDIT] is selected, go to the next step.
% If [DELETE] is selected, the information registered in the program dial is deleted, and the display re-
turns to the Store Address screen.
6 When necessary, use the One-Touch Dial Key, Speed Dial, or Keypad to specify a destination, and
press the OK key.
7 If necessary, change the Relay User Box ID or password using the Keypad, and press the OK key.
This registers settings, and returns to the Store Address screen.
RELAY INITIATE
DESTINATION