bizhub 226 7-9
7.2 Store Address
7
7.2.4 Registering destinations in the speed dial
Register a destination in the speed dial; you can specify a destination easily and accurately without entering
a fax number using the Keypad.
Up to 250 stations (001 to 250) can be registered in the speed dial.
1 Press the Utility key.
2 Use +, to select [DIAL REGISTRATION], and press the OK key.
3 Use +, to select [SPEED DIAL], and press the OK key.
4 Enter a desired 3-digit speed dial number using the Keypad, and press the OK key.
% This displays a speed dial number that is not registered as the default.
5 Use +, to select [MANUAL SETTING], and press the OK key.
% If the LDAP settings are not configured, this screen does not appear. Go to Step 6.
6 Enter the destination name using the Keypad, and press the OK key.
% For details on how to enter a character string, refer to [Quick Guide].
% The destination name can be specified with up to 20 characters.
7 Enter a destination fax number using the Keypad.
% For details on how to enter a character string, refer to [Quick Guide].
% A fax number can be specified using up to 30 digits.
% If an optional Image Controller IC-209 or Network Card NC-504 is installed on this machine, an
E-mail address can be entered into a destination.
% When not specifying the F-code transmission, baud rate, or transmission time, go to Step 10.
% When specifying the F-code transmission or baud rate, press ,, and go to the next step.
-PRESS OK KEY-
SPEED DIAL
SPEED DIAL
OTHER SETTING
SPEED DIAL 011
DESTINATION
To Next Page
Loading...
