Konica Minolta BIZHUB 226 - Display Message

bizhub 226 2-7
2.1 Control Panel
2
2.1.3 Display message
Fax mode screen
Utility screen
No. Display message Description
1 Time Displays the current time that is set to this machine.
2 Remaining amount of
memory
Displays the ratio of a free space in the memory. If the ratio comes
close to 0%, a new original may not be scanned due to a memory
shortage.
3 Image quality Displays the image quality setting of the original.
[STD/TEXT] Indicates that [STD/TEXT] is selected.
[FINE/TEXT] Indicates that [FINE/TEXT] is selected.
[S-
FINE/TEXT]
Indicates that [S-FINE/TEXT] is selected.
[STD/PHOTO] Indicates that [STD/PHOTO] is selected.
[FINE/PHO-
TO]
Indicates that [FINE/PHOTO] is selected.
[S-FINE/PHO-
TO]
Indicates that [S-FINE/PHOTO] is selected.
4 Entry mode Displays the currently specified entry mode.
[1...] Indicates that the digit entry mode is selected.
[A...] Indicates that the alphabet or symbol entry mode is selected.
5 Message Displays a message to prompt you to go to [OTHER SETTING], or the
state such as sending/receiving faxes or printing in the fax mode.
6 Fax number or E-mail
address
Displays a fax number or E-mail address you are currently typing.
7 Mode or function Displays setting menus or options.
OTHER SETTING=
QUALITY:STD/TEXT
MEMORY
UTILITY MODE
MACHINE SETTING
PAPER SOURCE SETUP
CUSTOM SIZE MEMORY
DRUM DEHUMIDIFY