Specifying a destination
3
3-12 bizhub 226
3.4
3.4.6 Program dial
Register a destination number and sending-receiving function such as the specified-time transmission or
polling reception in a One-Touch Dial Key in advance; you can only press the One-Touch Dial Key to exe-
cute the function.
d Reference
For details on how to register a destination in the program dial, refer to page 7-13.
1 Load the original.
% For details on how to load the original, refer to page 3-5.
% This step is not required for polling reception.
2 When necessary, specify a desired option for [QUALITY].
% For details on [QUALITY], refer to page 3-7.
% This step is not required for polling reception.
3 Press a key registered in the program dial among One-Touch Dial Keys 29 to 32.
% One-touch dial keys 29 to 32 are available when the Switching Plate is opened upward.
% If you press an incorrect One-Touch Dial Key, press the Clear/Stop key to cancel it.
4 Press the Start key.
The registered function starts automatically.
% To stop sending, press the Clear/Stop key, and select [YES] in the displayed screen.
d Reference
To cancel the specified-time transmission, press the Function key, and select [CANCEL RESERV.] to cancel
the reservation. For details, refer to page 3-20.
To Next Page
Loading...
