Store Address
7
7-6 bizhub 226
7.2
7.2 Store Address
This function allows you to register or change destinations or settings in the one-touch dial, speed dial, group
dial, or program dial.
7.2.1 Registration items
d Reference
The items above, excluding No.4, can also be configured using LSU (Local Setup Utility). For details, refer to
page 11-4.
If an optional Network Card NC-504 or Image Controller IC-209 is installed on this machine, settings can
also be configured using PageScope Web Connection. Items other than No.4 can be configured. For de-
tails, refer to PageScope Web Connection - [Address] - [One-Touch Dial Setting], [Address] - [Speed Dial
Setting], and [Address] - [Group Dial Setting] of [User's Guide Network Administrator].
To register destinations in the user mode of PageScope Web Connection, refer to the following.
Check the one-touch dial (p. 8-13)
Check the speed dial (p. 8-13)
Check the group dial (p. 8-14)
No. Store Address Contents
1 [ONE-TOUCH DIAL] Register a destination in a One-Touch Dial Key; you can specify a
destination easily and accurately without entering a telephone
number using the Keypad. Up to 32 stations can be registered in the
speed dial. It will be convenient to register the frequently used desti-
nations.
2 [SPEED DIAL] Register a destination in the speed dial; you can specify a destination
easily and accurately without entering a telephone number using the
Keypad.
Up to 250 stations can be registered in the speed dial.
3 [GROUP DIAL] Up to 50 stations can be registered as one group in a single One-
Touch Dial Key. It will be convenient to register the group dial when
frequently sending the same original to multiple determined destina-
tions.
4 [PROGRAM DIAL] Register a destination number and sending-receiving function such
as the specified-time transmission or polling reception in a One-
Touch Dial Key; you can only press the One-Touch Dial Key to ex-
ecute the function.
To Next Page
Loading...
