Ch.3 Sequence of Examination
< 71 >
REGIUS Console CS-3 OPERATION MANUAL Ver. 1.10 2005.2
5) Changing the text string of the annotation
Procedures to change the text strings of the annotation are
described below.
1 Move the cursor over the allocated annotation.
• The cursor changes from the arrow to the cross.
2 Left-click the mouse.
• Cursor blinks over the selected annotation.
Changes cannot be made on the rotated annotation. First, restore the original status
that is not rotated, then change the text strings.
3 Change the text strings using the keyboard.
• Pressing the [Enter] on the keyboard allow a line
break, and annotation of several lines can be input.
4 Click the [OK] button or left-click the mouse in the
area other than annotation.
• When the [OK] button is clicked, returns to the
“Detailed Data Setting” (Overlay) screen after
changing the annotation.
• When the area other than annotation is clicked,
switches the status to the one where the next
annotation can be allocated after the change is
effected.
When the text strings are selected, they change the color to “Black” when the background is
black, to “White” when the background is white, to “Blue” when the background is transparent.
4
2
p.72 Rotating the
allocated
annotation
To Next Page
Loading...
