Ch.3 Sequence of Examination
< 72 >
REGIUS Console CS-3 OPERATION MANUAL Ver. 1.10 2005.2
6) Rotating the allocated annotation
Procedures to rotate the allocated annotation are described
below.
1 Move the cursor over the allocated annotation.
• The cursor changes from the arrow to the cross.
2 Left-click the mouse.
• Cursor blinks over the selected annotation.
3 Click the [Rotate] button.
• Text string rotate by 15º every time the button is
clicked.
• Click the clockwise arrow to rotate the text string
clockwise.
• Click the counterclockwise arrow to rotate the text
string counterclockwise.
4 Click the [OK] button or left-click the mouse in the
area other than annotation.
• When the [OK] button is clicked, returns to the
“Detailed Data Setting” (Overlay) screen after
rotating the annotation.
• When the area other than annotation is clicked,
switches the status to the one where the next
annotation can be allocated after the rotation is
effected.
The text strings of the rotated annotation cannot be changed. Text can be changed
only after restoring the original status where the annotation is not rotated. Font size,
font color and background color can be changed even in the rotated status.
4
2
3
Ex) 15º rotation counterclockwise
To Next Page
Loading...
