Kostal INVEOR Drive Controller - Page 71

Parameters
Operating manual for INVEOR α | DOC01539818 - 0004 | 2017-01 | V2.0 EN 71
1.180 Acknowledge function Unit: integer
Relationship
to parameter:
1.181
1.182
Parameter
manual:
P. xy
Transfer status:
2
min.:
0 Own value
(to be entered!)
max.: 6
def.: 4
Selection of the source for error confirmation.
Errors can only be acknowledged once the error is no longer present.
Certain errors can only be acknowledged by switching the controller off and
on, see list of errors.
Auto acknowledgement via parameter 1.181.
0 = manual acknowledgement not possible
1 = rising flank at digital input 1
2 = rising flank at digital input 2
5 = foil keypad (Ackn key)
6 = analogue input 1 (must be selected in parameter 4.030)
(V 03.70 and higher)
1.181
Automatic acknowledgement
function
Unit: s
Relationship
to parameter:
1.180
1.182
Parameter
manual:
P. xy
Transfer status:
2
min.: 0 Own value
(to be entered!)
max.: 1000000
def.: 0
In addition to the acknowledgement function (1.180), an automatic fault
acknowledgement can be selected.
0
= no automatic acknowledgement
> 0
= time for automatic resetting of error
in seconds