KWB Easyfire - 12 Fe S, Pellet Stirrer Plus, Elbow Worm; Pellet Storage Room Requirements (FE Type S with Pellet Stirrer Plus)

© KWB – Kraft und Wärme aus Biomasse GmbH IM Easyfire 10/2008 Page 115
12 Pellet Stirrer Plus
12 Pellet Stirrer Plus
12 FE “S”, PELLET STIRRER PLUS, ELBOW WORM
200 - - 0 0 - 430
250 - - 0 0 - 330
300 - - - 0 - 190
350 - - - 0
Ricochet protection mat
Wooden boards
p( g
Solid ceiling F90
Ceiling opening ; 10 cm (seal
after installation – trough is
acoustically decoupled)
Fire-safety collar
Drop hose ; 7.5 cm
Comply with floor load specifications!
Max. 25 °
Elbow worm Elbow worm
Pellet Stirrer Plus
Elbow worm
Pellet Stirrer Plus
Version with drop shaft
12.1 Pellet storage room requirements (FE type S with Pellet Stirrer Plus)
Comply with the instructions in points 1.3 and 1.3.2 in the introduction!
Enclose the conveyor trough with a rock wool shell for the wall penetration (acoustic insulation).
MA-Easyfire 10.2008_EN.indd 115MA-Easyfire 10.2008_EN.indd 115 30.03.2009 13:30:57 Uhr30.03.2009 13:30:57 Uhr