KWB Easyfire - Sectional Drawing, Pellet Storage Room

Page 152 IM Easyfire 10/2008 © KWB – Kraft und Wärme aus Biomasse GmbH
18.1 Dimension sheets
18.1 Dimension sheets
Sectional drawing, pellet storage room
Suction connector
Pellet blow-in nozzle
Useable volume
is emptied
automatically by
the conveyor worm
Attachment at least 27 mm
thick, plates with smooth
surface or rough boarding,
25 mm with hard fibre
support surface
Sloping floor support or
squared timber, e.g. 8 x 8 cm
Provide cross
connection when
using unplaned
boards
Empty space
Section in the closed trough
min. 27 mm
Wall penetration
200 x 200 or Ø 300
For room widths
greater than 3 m
provide additional
support
Centre storage room
MA-Easyfire 10.2008_EN.indd 152MA-Easyfire 10.2008_EN.indd 152 30.03.2009 13:31:47 Uhr30.03.2009 13:31:47 Uhr