18.6 Stickers & warnings
The stickers listed below must be affixed to the system:
Sample sheet:
(200x115mm = 5 x 6 Stk. pro Bogen = 1/30-Bogen) 12.08.04 - KWB - DEU/USP
Unplug the power plug before opening!
Install 55 °C return flow boost!
Mains 230 V
Return flow Forward flow
Forward flow
Return flow
Main switch
Induced
draft
GS/GL
Safety
thermostat
!
Strictly ensure that the warning “Prior to opening, unplug the mains plug” is easily visible on
the cover of the I/O board!
Warning!
front back
MA-Easyfire 10.2008_EN.indd 215MA-Easyfire 10.2008_EN.indd 215 30.03.2009 13:32:32 Uhr30.03.2009 13:32:32 Uhr
To Next Page
Loading...
