KWB Easyfire - 14 Fe Gs Suction Conveyor, Pellet Stirrer Plus; Pellet Storage Room Requirements (FE Type GS with Pellet Stirrer Plus)

© KWB – Kraft und Wärme aus Biomasse GmbH IM Easyfire 10/2008 Page 131
14 Suction conveyor, Pellet Stirrer Plus
14 Suction conveyor, Pellet Stirrer Plus
14 FE “GS” SUCTION CONVEYOR, PELLET STIRRER PLUS
Wooden boards
Ricochet protection mat
Solid ceiling F90 Solid ceiling F90
Min. 30
Conveyor height without step max. 300
gp g;
Fire-safety collar
14.1 Pellet storage room requirements (FE type GS with Pellet Stirrer Plus)
Comply with the instructions in points 1.3 and 1.3.2 in the introduction!
Enclose the conveyor trough with a rock wool shell for the wall penetration (acoustic insulation).
Boiler room and storage room construction
MA-Easyfire 10.2008_EN.indd 131MA-Easyfire 10.2008_EN.indd 131 30.03.2009 13:31:22 Uhr30.03.2009 13:31:22 Uhr