2 System installation
Transfer the screws of the side cladding elements from the front
to the rear.
Transfer screws (1)
Transfer the following screws into the adjacent pressed-in nuts:
Screws for the burner cover
or
screws for fastening the suction tank
Transfer screws (2)
Assemble the boiler in the reverse sequence of steps 2.1.1.1 and 2.1.1.2.
MA-Easyfire 10.2008_EN.indd 21MA-Easyfire 10.2008_EN.indd 21 30.03.2009 13:29:53 Uhr30.03.2009 13:29:53 Uhr
To Next Page
Loading...
