2NC/2NF/2NG/2NN/3P7/3P8/3P9
1-5-71
53. Remove the stop ring and slide the
gear forward.
54. Remove the registration roller forward
after sliding it backward.
*: Be careful to don't drop a bushing, when
removing a regist roller.
Figure 1-5-124
55. Remove eight connectors.
56. Release five wire saddles and remove
the cable tie.
*: Be careful to don't break the switch, when
removing two connectors of the A section.
Figure 1-5-125
Gear
Bushing
Stop ring
Regist roller
Mein/Engine PWB
Connectors
Connectors
Connector
Connectors
Wire saddles
Cable tie
A
Connector
To Next Page
Loading...
