Kyocera DP-480

2NC/2NF/2NG/2NN/3P7/3P8/3P9
1-5-72
57. Remove two screws
58. Unhook two hooks of the fan assembly.
59. Rotate the fan assembly forward at the
care of the back.
Figure 1-5-126
60. Remove ten screws.
61. Release two projections and remove
the rear frame.
Figure 1-5-127
Fan assembly
Screw
Screw
Hooks
Screw
Screw
Screw
Screw
Screw
Screw
Screw
Screw
Screw
Screw
Screw
Rear frame
Projections