System Settings
ADVANCED OPERATION GUIDE 5-5
Unit of Measurement
Use the following procedure to change the unit of measurement used for
Custom Original Size and Custom Paper Size settings.
1
Press [System Menu / Counter]. The Sys. Menu/Count screen displays.
2
Press S or T to select Common
Setting and press [Enter].
The Common Setting screen
displays.
3
Press S or T to select
Measurement and press [Enter].
The Measurement screen
displays.
4
Press S or T to select Inch or
mm and press [Enter].
A Completed message displays
and the Common Setting screen
returns.
Sys. Menu/Count.:
Date/Timer Set.
Adjust
Common Setting
Exit
One Touch Keys
Common Setting:
Toner Setting
Measurement
Exit
Measurement:
*
Cancel
Inch
mm
To Next Page
Loading...
