Using COMMAND CENTER
ADVANCED OPERATION GUIDE 6-13
Printer Page
This section includes settings that apply to the printing function of the
device, such as default print resolution or copy count. If the Admin
password has been set, pages in this section are available only to the
Administrator.
Default printer settings will be overridden by the printer driver settings.
Settings that affect the entire device, such as locking the operation panel,
are found under Basic page.
Printer > Defaults: System Page
The table below provides a summary of the items displayed on the Printer
System page.
Item Description
Form Feed
Timeout
Sets the timeout time for form feed. The default setting
is 30 seconds.
Copies Sets the number of copies to print.
Page
Orientation
Sets portrait or landscape page orientation.
KIR Mode Switches KIR smoothing On or Off.
EcoPrint Switches EcoPrint On or Off. (EcoPrint On reduces the
amount of toner used to save costs.) The default
setting is Off.
Resolution Sets the printing resolution to 300 dpi, 600 dpi or Fast
1200. The default setting is Fast 1200.
To Next Page
Loading...
