Printer Settings
ADVANCED OPERATION GUIDE 3-3
Parallel Setting
The printer enables fast data transmission on the Parallel interface. The
Parallel interface mode can be activated from the Operation Panel as
follows:
NOTE: Use a parallel printer cable that complies with the IEEE1284
standard.
1
Press [System Menu / Counter]. The System Menu/Count screen
displays.
2
Press S or T to select System
Setting and press [Enter].
The System Setting screen
displays.
3
Press S or T to select Parallel
Setting and press [Enter].
The Parallel Setting screen
displays.
Item Description
Auto (default) The printer automatically changes communication
mode to the one the host computer is currently using.
It is recommended this setting remains unchanged.
Normal The printer uses the standard communication method
recommended for Centronics interfaces.
High Speed This mode enables faster data transmission between
the printer and the host computer. Use this mode if
printing problems occur when the printer is connected
to a workstation.
Nibble (high) High speed data communication is used in
compliance with the IEEE 1284 standard.
*
Sys. Menu/Count.:
Counter
System Setting
Report
Exit
*
System Setting:
Back
NetworkSetting
Parallel Setting
Exit
To Next Page
Loading...
