System Settings
5-26 ADVANCED OPERATION GUIDE
Panel Reset Time
The Auto Clear function automatically returns the machine to the default
settings when no operation has been performed on the machine or
operation panel for a pre-set period of time (between 5 and 495 seconds).
The factory default setting for the pre-set period is 90 seconds.
NOTE: The current exposure mode and the Original Quality mode
settings will not change.
Auto Panel Reset
1
Press [System Menu / Counter]. The Sys. Menu/Count screen displays.
2
PressS or T to select Date/Timer
Set and press [Enter].
The Date/Timer Set screen
displays.
3
Press S or T to select Auto
Panel Reset and press [Enter].
The Auto Panel Reset screen
displays.
4
Press S or T to select On or Off
and press [Enter].
A Completed message displays
and the Date/Timer Set screen
returns.
Sys. Menu/Count.:
System Setting
Date/Timer Set.
Adjust
Exit
Date/Timer Set.:
Sleep Timer
Err. Clear Timer
Auto Panel Reset
Exit
Auto Panel Reset:
Off
On
Cancel
*
To Next Page
Loading...
