System Settings
ADVANCED OPERATION GUIDE 5-17
Alarms
The various alarms can be enabled and/or the sound volume adjusted.
Increasing the volume of the alarms is useful if the machine is located
away from users. The following shows the various alarms and the available
volume settings - the factory default is shown in bold type.
Alarm
Available
Settings
Description
Volume 0 Off
1 Minimum
2
3 Middle
4
5 Maximum
Use to adjust the volume of the alarms.
The higher the setting value, the louder
the volume.To make all alarm sounds
inaudible, select Off.
Key Conf.
Buzzer
Off
On
Indicates acceptance of the key operation
performed by the user.
Key Fail
Buzzer
Off
On
Indicates the machine is unable to accept
the key operation performed by the user.
Reset
Buzzer
Off
On
Indicates the Reset Power key was
pressed to reset the current settings.
Job End
Buzzer
Off
On
Indicates a copy, print, or scan job has
been completed or the machine has
returned to an operation-ready state.
Ready
Buzzer
Off
On
Indicates the machine is in an operation-
ready state.
To Next Page
Loading...
