Kyocera FS-1018MFP

Printer Settings
3-6 ADVANCED OPERATION GUIDE
5
To use AppleTalk, select On and
press [Enter].
A Completed message displays
and the Network Setting screen
returns.
TCP/IP Setting
This setting should be set to On when the machine is connected to a
Windows network, for example using TCP/IP.
1
Refer to steps 1 through 3 of AppleTalk Setting to access the Network
Setting screen.
NOTE: If you are performing this procedure immediately after setting up
AppleTalk, the Network Setting screen will be displayed.
2
Press S or T to select TCP/IP
Setting and press [Enter].
The TCP/IP Setting screen
displays.
3
Press S or T to select TCP/IP
and press [Enter].
4
To use TCP/IP, select On and
press [Enter].
A Completed message displays
and the TCP/IP Setting screen
returns.
*
AppleTalk Set.:
On
Off*
Cancel
*
TCP/IP Setting:
Back
TCP/IP
DHCP
Exit
*
Network Setting:
Back
AppleTalk Set.
TCP/IP Setting
Exit
*
TCP/IP Setting:
Back
TCP/IP
DHCP
Exit
*
TCP/IP Setting:
On
Off
*
Cancel