Kyocera FS-1018MFP

Copying Functions
1-8 ADVANCED OPERATION GUIDE
Number of Copies
Use the following procedure to enter the number of copies required. The
maximum number of copies is 999.
1
Position the original.
2
Press [Copy]. The Copy Basic screen displays.
3
Use the numeric keys to enter the
number of copies required.
NOTE: To cancel the number of copies entered, press [Stop/Clear]. The
number of copies is reset to 1.
If you attempt to enter more than 999, the number of copies will
automatically be set to 999.
4
Copies are delivered to the Output Tray or the Face-up Tray. The Output
Tray holds approximately 150 sheets of 80g/m
2
paper. The Face-up Tray
holds approximately 30 sheets of 80g/m
2
paper.
NOTE: To avoid paper jams or machine damage, do not leave more than
approximately 30 sheets of standard paper (80 g/m
2
) or one sheet of
special paper in the Face-up Tray.
To avoid paper jams or machine damage, do not leave more than
approximately 150 sheets of standard paper (80 g/m
2
) in the Output Tray.
*
Ready to copy.
A4
A4
set:
Zoom
100%
1