Kyocera FS-1018MFP

System Settings
ADVANCED OPERATION GUIDE 5-31
Auto Error Clear
If a printing error occurs that still allows printing to continue, setting Auto
Error Clear to On enables the next job to be printed after a set recovery
period (Error Clear Time) has elapsed.
The factory default setting for Auto Error Clear is Off. The Error Clear Time
period can be set between 5 and 495 seconds - the factory default is 30
seconds.
Turning Auto Error Clear On or Off
1
Press [System Menu / Counter]. The Sys. Menu/Count screen displays.
2
Press S or T to select Date/
Timer Set and press [Enter].
The Date/Timer Set screen
displays.
3
Press S or T to select Auto Err.
Clear and press [Enter].
The Auto Err. Clear screen
displays.
4
Press S or T to select On or Off
and press [Enter].
A Completed message displays
and the Date/Timer Set screen
returns.
Sys. Menu/Count.:
System Setting
Date/Timer Set.
Adjust
Exit
Date/Timer Set.:
Auto Panel Reset
Auto Sleep
Auto Err. Clear
Exit
Auto Err. Clear:
Off
On
*
Cancel