System Settings
5-12 ADVANCED OPERATION GUIDE
Function Defaults
Use the following procedure to change the default settings for the various
functions. For functions that you use often, changing the default value to
the desired setting will minimize the time required to make selections. The
following shows the functions for which the default values can be changed
and their available settings.
NOTE: The factory default settings are shown in bold type.
1
Press [System Menu / Counter]. The Sys. Menu/Count screen displays.
2
Press S or T to select Function
Default and press [Enter].
The Function Default screen
displays.
Function Available Settings Reference Page
Scan Color Select Full Color
Grayscale
Monochrome
2-7
Scan Resolution 200 × 200 dpi
300 × 300 dpi
400 × 400 dpi
600 × 600 dpi
2-9
Original Quality Text + Photo
Photo
Text
2-8
Exposure Auto
Manual
1-7 and 2-9
Zoom Auto
100%
1-9 and 2-13
Collate Off
On
1-14
Orig. Placement Top Edge to Rear
Top Edge to Left
1-12 and 2-11
File Name Entry
(Text)
doc 1-25 and 2-20
(Additional Info.) None
Date and Time
Job No.
1-25 and 2-20
Sys. Menu/Count.:
Copy Setting
Printer Setting
Function Default
Exit
To Next Page
Loading...
Need help?
General
