System Settings
ADVANCED OPERATION GUIDE 5-13
3
Press S or T to select the default
setting that requires changing,
and press [Enter].
The screen for the default setting
displays.
4
Press S or T to select the new
default setting and press [Enter].
A Completed message displays
and the Function Default screen
returns.
NOTE: To change the value for another default setting, repeat steps 3
and 4.
5
Press [Copy] or [E-Mail]. The Basic screen is displayed.
6
Press [Reset]. The default values will be activated.
FunctionDefault:
Scan Resolution
ScanColor Select
Back
Exit
ScanColor Select:
Full Color
*
Cancel
Monochrome
Grayscale
To Next Page
Loading...
