System Settings
5-16 ADVANCED OPERATION GUIDE
Restarting the Machine
Always use the following procedure to restart the machine after you have
changed any network settings in order to correctly register the content of
those settings.
1
Press [System Menu / Counter]. The Sys. Menu/Count screen displays.
2
Press S or T to select System
Setting and press [Enter].
The System Setting screen
displays.
3
Press S or T to select Restart
and press [Enter].
An Are you sure? message
displays.
To restart the machine, press the
left [Select] key. The machine
restarts.
To exit without restarting, press
the right [Select] key. The
System Setting screen displays.
Sys. Menu/Count.:
Counter
System Setting
Report
Exit
System Setting:
Parallel Setting
Network Setting
Restart
Exit
Restart.
Are you sure?
NoYes
To Next Page
Loading...
