System Settings
5-10 ADVANCED OPERATION GUIDE
Resetting the Toner Status
To ensure the correct information displays for the Toner Status, the Toner
Gauge must be reset after replacing the Toner Container.
NOTE: To ensure the correct Toner Status displays, do not perform this
procedure unless you have replaced the Toner Container.
1
Press [System Menu / Counter]. The Sys. Menu/Count screen displays.
2
Press S or T to select Common
Setting and press [Enter].
The Common Setting screen
displays.
3
Press S or T to select Toner
Setting and press [Enter].
The Toner Setting screen
displays.
4
Press S or T to select Toner
Gauge Rset and press [Enter].
An Are you sure? message
displays.
Setting Menu Description
Toner Gauge Rset
(Toner Gauge Reset)
The toner counter is reset and the amount of
toner remaining will be printed out on the
Status Page as 100 %.
Sys. Menu/Count.:
Date/Timer Set.
Adjust
Common Setting
Exit
One Touch Keys
Common Setting:
Orig./Paper Set.
Toner Setting
Exit
Toner Setting:
Back
Toner Gauge Rset
Exit
To Next Page
Loading...
