Using COMMAND CENTER
6-6 ADVANCED OPERATION GUIDE
NOTE: To return from any other page to this Home page (the first screen
that appears after COMMAND CENTER has been started up), click on
T
[Start].
Start > Status Pages
These pages allow you to verify the various settings (machine, printing,
scanning, network and e-mail) that were made on the operation panel or
using COMMAND CENTER.
Page Description
Start > Status
page:
Network:
General
Use to verify the settings made under SNMP,
AppleTalk, TCP/IP, IPP (Internet Printing Protocol) and
NetBEUI in the Advanced Page.
For more detailed information on SNMP, refer to
Advanced > Management / E-mail: SNMP on page 6-
21.
For more detailed information on other items, refer to
Advanced > Protocols: TCP/IP: General on page 6-17.
Start > Status
page:
Network: IP
Filters
Displays the list of IP addresses and Subnet Masks
that have access permissions as set on the IP Filters
page of the Advanced Page. If no IP addresses have
been designated, then access permission will be
granted to all addresses.
For more detailed information, refer to Advanced >
Protocols: TCP/IP: IP Filters on page 6-18.
Start > Status
page:
Network:
SMTP
Use to verify the e-mail-related settings that have been
made on the SMTP page of the Advanced Page.
For more detailed information, refer to Advanced >
Management / E-mail: SMTP on page 6-20.
Start > Status
page:
Network:
Logical
Printer
Use to verify settings that have been made on the
Logical Printers page of the Advanced Page.
For more detailed information, refer to Advanced >
Protocols: TCP/IP: Logical Printers on page 6-18.
Start > Status
page: Device
/ Printer
Use to verify the settings that have been made on the
Basic page and the Printer page.
For more detailed information, refer to Basic Page on
page 6-8 and Printer Page on page 6-13.
Start > Status
page:
Scanner
Use to verify the settings that have been made on the
Scanner Page.
For more detailed information, refer to Scanner Page
on page 6-15.
Start > Status
page: Usage
Counters
Use to verify the number of scanned pages and the
number of prints that have been made on the
machine.
To Next Page
Loading...
