Using COMMAND CENTER
ADVANCED OPERATION GUIDE 6-11
Basic > Reset Page
This page allows you to restart the machine in order to make all settings in
the machine valid. It is also possible to select to have all settings returned
to their factory default values.
Basic > Device Defaults Page
This page allows you to change the language that is used in the message
display, as well as switch Auto Sleep mode On or Off.
Synchronize
with Time
Server now
Click on the [Synchronize] button to synchronize the
registered time with the designated timer server.
Synchroniza
tion Status
Displays the results of the synchronization operation
with the time server.
Synchronization was successful: Last synchronization
was successful.
Synchronization was not successful: Last
synchronization failed.
Item Description
Item Description
Restart
entire
device
When clicking the [Restart] button, the machine
restarts.
The setting becomes effective when you restart the
machine. Always restart the machine after you have
changed any settings for the Basic > Network Page or
the Advanced Page.
Reset entire
device to
factory
default
When clicking the [Reset] button, the machine returns
to the factory default settings.
Item Description
Operation
Panel
Language
The following languages are available for selection in
the dropdown list.
English, Français, Deutsch, Italiano, Nederlands,
Español, and Português
You can also download messages in other languages.
Contact your dealer for information.
Enter Sleep
Mode after
Adjusts the sleep time between 1 to 240 minutes. The
default setting is 30 minutes.
To Next Page
Loading...
