Kyocera FS-1018MFP

Appendix-4 ADVANCED OPERATION GUIDE
Paper Size
Cassettes and the MP Tray are available for the paper sizes listed in the
table below. The dimensional tolerances are ±0.7 mm (±0.0276 inches) for
the length and width. The angle at the corners must be 90° ±0.2°.
Smoothness
The paper should have a smooth, uncoated surface. Paper with a rough or
sandy surface can cause voids in the printed output. Paper that is too
smooth can cause multiple feeding and fogging problems. (Fogging is a
gray background effect.)
Basis Weight
Basis weight is the weight of a standard quantity of paper. In the traditional
system the standard quantity is a ream consisting of 500 sheets measuring
17 × 22 inches each. In the metric system the standard quantity is 1 square
meter.
Paper that is too light or too heavy can cause jams and premature wear of
the machine. Uneven paper weight can cause multiple feeds, print defects,
poor toner fusing, blurring, and other print quality problems. The correct
weight is 60 to 105 g/m² for the Cassettes, and 60 to 163 g/m² for the MP
Tray.
MP Tray Size
Cassette
or MP Tray
Size
Statement 5
1/2 × 8 1/2 inches Letter 8 1/2 × 11 inches
ISO A6 105 × 148 mm Legal 8
1/2 × 14 inches
JIS B6 128 × 182 mm ISO A4 210 × 297 mm
Envelope #10 4
1/8 × 9 1/2 inches ISO A5 148 × 210 mm
Envelope #9 3
7/8 × 8 7/8 inches JIS B5 182 × 257 mm
Envelope
Monarch
3
7/8 × 7 1/2 inches Folio 210 × 330 mm
Envelope #6 3
5/8 × 6 1/2 inches Oficio II 8 1/2 × 13 inches
Envelope DL 110 × 220 mm Executive 7
1/4 × 10 1/2 inches
Envelope C5 162 × 229 mm ISO B5 176 × 250 mm
Hagaki 100 × 148 mm 16K 197 × 273 mm
OufukuHagaki 148 × 200 mm
Youkei 2 114 × 162 mm
Youkei 4 105 × 235 mm
Custom 80 to 216 mm × 148 to 356 mm (3.15 to 8.50 inches ×
5.83 to 14.02 inches)