Scanning Functions
ADVANCED OPERATION GUIDE 2-17
Using Continuous Scan
1
Position the original.
2
Press [E-Mail]. The Scanner Basic screen displays.
Enter the e-mail address of the intended recipient and make other
selections for the first original as required.
3
Press [Start]. The first original is
scanned.
4
When scanning has finished a
message displays: Set original
and press Start key.
Position the next original on the
Platen and press [Start]. The next
original is scanned.
5
Repeat step 4 until all originals have been scanned.
6
When all originals have been
scanned, press the right [Select]
key. An Accepted message
displays and the Scanner Basic
screen returns.
Job No.:
*
Scanning.
Cancel
Job No. 123:
*
Set original
Page:
Cancel
Job No.:
1
123
and press Start key.
End Scan
*
Set original
Page:
Cancel
Job No.:
8
123
and press Start key.
End Scan
To Next Page
Loading...
