Kyocera FS-1018MFP

Scanning Functions
ADVANCED OPERATION GUIDE 2-21
Entering a File Name
1
Press [E-Mail]. The Scanner Basic screen displays.
2
Press [Function].
3
Press S or T to select File Name
Entry and press [Enter].
The File Name Entry screen
displays.
4
Enter the File Name, and press
[Enter].
The Additional Info screen
displays.
NOTE: The factory default setting for the File Name is doc. Use
COMMAND CENTER if you want to change the default File Name.
The File Name can be between one and 30 characters long.
For information about entering characters, refer to Chapter 3 of the Basic
Operation Guide.
5
Press S or T to select the
information to add to the File
Name and press [Enter]:
A Completed message displays
and the Function screen returns.
6
Press the right [Select] key. The Scanner Basic screen displays.
*
Function:
Continuous Scan
File Format
File Name Entry
Exit
File Name Entry:
Text
ABC
Cancel
doc
*
Additional Info.:
Cancel
Date and Time
Job No.
None
*