Kyocera FS-1018MFP

ADVANCED OPERATION GUIDE 3-1
3 Printer Settings
This section explains how to change settings which are
required for the printer functions of the machine.
The settings for a network printer can be entered using
either the Operation Panel or COMMAND CENTER.
This chapter explains using the Operation Panel. For
information about using COMMAND CENTER refer to
page 6-2.
This chapter includes the following topics:
• Network Printing............................................. 3-2
• Parallel Setting............................................... 3-3
• Network Settings............................................ 3-5
• Emulation Mode........................................... 3-10
• Other Printer Settings................................... 3-12