Introduction
Laborie NXT Pro Owner’s Manual LBL-00146 [C], MAN2010 13
1.3 Equipment Intended Use
Refer to the following descriptions for a breakdown of intended use per module.
Standard Equipment
• NXT docking station with pump: Wired device that uses a peristaltic infusion
pump to fill a patient’s bladder with saline and/or contrast.
• Urocap NXT: Wired or wireless and battery-powered device that measures
volume and flow rate of urine.
• Patient Interface Module NXT (PIM NXT): Device that is powered by the
Roam NXT to measure pressure and electromyography.
• Roam NXT: Wired or wireless and battery-powered detachable module that
connects to the PIM NXT.
• PC: Computer that controls the system activity as well as displays and stores
data.
• Synergy: Application software that runs on the PC to control the system activity
as well as displays and stores data.
• Bluetooth Dongle NXT: Allows wireless communication between modules and
the system.
• Remote Control NXT: Wireless and battery-powered device that allows control
of the system from a distance.
Optional Equipment
• Video card/adaptor: Allows information from an external image source to be
recorded by the system.
• Printer: Allows hardcopy reports to be created.
• UPP Puller NXT: Wired or wireless and battery-powered device that controls and
measures speed and distance during a Urethral Pressure Profile.
Accessories
The accessories of the equipment are as follows:
• Catheters, electrodes, tubing, pressure transducers: Disposable or reusable
items used for infusion and to measure pressure from the patient.
• Commode, procedure chair: Supports patient and facilitates position changing
throughout the procedure.
• Flow stand, IV pole, carts, stands, trolleys: Provides mountable surfaces for
standard equipment and accessories.
• SmartSense Barcode reader: Allows consumable device information to be
recorded by the system.
1.4 Contraindications
None known.
To Next Page
Loading...
