4-34 Description and Operation
D-H023.0906EN
innovators in agriculture
• Alarm
• Facilities
• Accessories
• General
• Engineering.
Button [Calibration robotarm].
Tab name: Indications
This tab gives an overview of all reports and alarms. Refer to Alarm
Handling (page 6-17).
It also has a button [Refresh] to refresh the list.
Tab name: System
This tab shows the status of the components used in the milking robot.
It also contains the following soft buttons:
• [Start]: to start all components of the milking robot
• [Shutdown]: to shutdown all components of the milking robot
• [Reset all]: to reset the control system of the milking robot
• [Change view]: to switch between status of the milking robot and the
facilities and the status of all components.
• [Quit]: to disable the touch screen (
to enable it).
Tab name: T4C
This tab enables the operator to communicate with the T4C software.
The operator can see reports that include which cows were too late for
milking and when a milking failed.
Button Date / Time
The button [Date / Time] displays the actual date or time (toggle).
Active Alarm Indicator
If there are active alarms, a button with a red exclamation mark is
displayed next to the button [Date / Time].
To Next Page
Loading...
Need help?
General
