4-38 Description and Operation
D-H023.0906EN
innovators in agriculture
4.4.2 CRS+
The CRS+ is a cleaning and reporting system to:
• Schedule (main) cleaning for all attached milking robots
• Enable emptying the milk storage tank
• Control the buffer vessel (if applicable)
• Control the pre cooler (if applicable)
• Control the twin filter (if applicable)
• Send alarms to the user by telephone (speech or text message) or
beeper
• Store alarms.
CRS+ is in most cases installed in the tank room. It is connected to the
T4C network.
The keypad enables the user to give commands to the milking system,
change values, and navigate through the CRS+ menu that is shown on
the display panel. The display panel also shows reports and alarms.
Figure 12. CRS+ Interface
To Next Page
Loading...
