Operating Instructions 6-1
D-H023.0906EN
innovators in agriculture
6. OPERATING INSTRUCTIONS
6.1 Start Up and Reset
6.1.1 Put the Milking Robot in Operation with the X-Link
1. On the X-Link, select:
• Button
to open the quick launch buttons bar.
•
During starting up the next button is displayed:
.
Note:
When the milking robot is in operation the 'Stop' button
is
displayed.
6.1.2 Take the Milking Robot(s) out of Operation
It is possible to take a single milking robot out of operation, or to take
all milking robots in the cluster out of operation. The first is done with
the X-Link, the latter is done with the CRS+.
6.1.2.1 Take the Robot Out of Operation with the X-Link
1. On the X-Link, select:
• Button
to open the quick launch buttons bar.
•
.
When the ongoing milking or cleaning process is finished the
ASTRONAUT A3 Next stops, meanwhile the next button is
displayed:
Note:
When the milking robot is out of operation the 'Start' button
is
displayed.