7-42 Maintenance
D-H023.0906EN
innovators in agriculture
Figure 54. Replace the milk filter
7.9.4 Replace the Filter Element of the Twin Filter
1. On the CRS+, push button .
2. Push [ENTER].
3. Hold the filter housing and remove the cap.
4. Remove the filter housing.
5. Remove the filter sock and the spring from the filter housing.
6. Examine the filter sock for flakes that indicate mastitis in the herd.
7. Remove the filter ring and the filter sock from the spring.
8. Rinse the filter ring and the filter housing with clean water.
9. Make sure the thread and the top of the filter housing are clean
and dry.
10. Slide the spring into a new filter sock and fold the sock top into the
top of the spring.
11. Install the filter ring on the spring.
To Next Page
Loading...
Need help?
General
