6-8 Operating Instructions
D-H023.0906EN
innovators in agriculture
Figure 19. Set the teat coordinates
6.2.1.8 Feeding
Ration at the feed fence
First of all, the quantity of feed at the feed fence must be calculated.
This ration should be enough for the cows with a lower production. The
following rule of thumb can be applied: average milk production per
cow minus 7. For example, if cows produce 32 kg, the ration distributed
at the feed fence should be suitable for 32 – 7 = 25 kg. This rule of
thumb is based on average variations among cows in the herd.
Ration in the robot
Feed the cows at least 2 kg of feed during the complete lactation
period. In this way low yielding cows also stay attracted to the robot.
Start at day 1 of lactation with a minimum amount of 2 kg of
concentrates. Increase this amount in 30 days to a maximum of 8 kg. The
optimal feed speed depends on the milk speed of the cow and should be
set on 300 – 400 g/min.
6.2.2 Interrupt a Visit
1. Select Tab [Process].
2. In the field Progress, select [Interrupt visit].
The pop-up window Confirm user interruption of this visit appears:
1. If the visit succeeded, select [Succeeded].
2. If the visit is not succeeded, select [Failed] .
3. In the field Visit will:, select [Stop].
To Next Page
Loading...
