LELY ASTRONAUT A3 Next - Robot Arm Falls Down; Robot Arm Does not Connect; Cow is Not Identified

Troubleshooting 9-3
D-H023.0906EN
innovators in agriculture
9.9 Robot Arm falls down
1. Make sure the compressor functions correctly.
2. If the problem remains, call your local Lely service provider.
9.10 Robot Arm does not Connect
1. Make sure the sTDS is clean (page 7-27).
2. Make sure the udder is shaven.
3. Make sure the weigh floor and its surroundings are clean.
4. Make sure the cow is calm.
5. If the problem remains, call your local Lely service provider.
9.11 Cow is not identified
1. Make sure the cow tag is correctly attached (page 6-4).
2. If the problem remains:
1. Attach a new cow tag.
2. Make sure the cow is identified.
3. If the problem remains, call your local Lely service provider.