LELY ASTRONAUT A3 Next - Calibrate the Feed Portion

Maintenance 7-17
D-H023.0906EN
innovators in agriculture
Figure 35. Clean the feeding system
7.6.2 Calibrate the Feed Portion
Preparation
WARNING
Block the cow traffic to the milking robot before you do this
procedure.
1. Take the milking robot out of operation with the X-Link (page 6-1).
2. Select:
• Tab [Test]
• [Calibrate]
• [Feed portion].
3. In the field Gates, Exit gate, select [Open].
4. Go into the box via the exit gate.
5. Empty the feed bin.
6. Go out of the box via the exit gate.