Maintenance 7-49
D-H023.0906EN
innovators in agriculture
7.12 Control Systems
7.12.1 Examine the Attention Alarms
Examine
1. Examine the attention alarms on the X-Link, T4C or the CRS+ as
follows:
• On the X-Link, select Tab [Indications].
• Push button [Refresh].
• On the T4C system, refer to the T4C manual.
• On the CRS+, select Main Menu
> Alarm system > List of
active alarms.
2. If necessary, correct the problems shown by the attention alarms.
Note:
Cows with a milking interval of more than 10 hours must be guided into the
milking robot.
Cows with a different conductivity, color attention, feed intake or milk yield
must be examined for (udder) health.
7.12.2 Examine the Attention List
Examine
1. Examine the attention list on the X-Link or the T4C as follows:
• On the X-Link, select tab [T4C].
• On the T4C system, refer to the T4C manual.
Note:
– Cows with a milking interval of more than 10 hours must be guided into the
milking robot.
– Cows with a different conductivity, color attention, feed intake or milk yield
must be examined for (udder) health.