6-18 Operating Instructions
D-H023.0906EN
innovators in agriculture
6.9.4 Clear Active Alarms
On the CRS+:
1. Select:
• Main Menu > Alarm system > Clear alarm list
•
Yes.
2. Press [ENTER].
Note:
If the cause of the alarm is removed, a reset on the milking robot will also
clear the alarm on the CRS+.
If an alarm was not confirmed on the milking robot it will appear again on the
CRS+.
Push short keys [1], [3]
6.9.5 Suppress Active Alarms
On the CRS+:
1. Select:
• Main Menu > Alarm system
> Ignore alarms next 60 min?
• Yes.
2. Press [ENTER].
Push short keys [1], [4]
6.10 Display the Event History
On the CRS+:
1. Select:
• >
Event history
2. Push [ENTER].